Contact Us

Address:No. 8 Haier Road, Jiaozhou Bay industry 
Qingdao Jiaozhou City, P. R. China
Sales One:0086-532-87273138
Sales Two:0086-532-87273138
Fax:0086-532-87273086
Mobile:+86-13853290988
E-mail:huasu@metatuber.com

Shandong Huasu Plastic Technology Co., Ltd.           

PRODUCTS CENTER

PPR Pipe Extrusion Line

Detail

Description of PPR Pipe Extrusion Line:

Diameter Scope: (OD)Φ20mm-Φ160mm
PPR pipe introduction:    
We designs and develops PPR pipe production line and gas pipe production line by itself. Plastic Pipes that are produced by this line have excellent stiffness,energy-saving insulation and non-toxic,health performance so on. It has become the first choice for the hot/cold water pipe.
PPR pipe produced from our machine has features as follows: 
(1). The pipe is new environmental friendly product. 
(2). Has the features of sanitation, non-poison, non-rust, heat resistance and long life. 
(3). Mainly used in the fields of water supply and hot water for warm for resident life and industry.
(4). Can replace copper pipe and aluminium pipe. 
(5). The machine can be changed to produce PPA/PPC/PP/PE pipe.  

Technical Introduction
Firstly, put PP-R material and other assistant material into the mixer and mixing the material symmetrically, then feed into the hopper, at the same time heat extruder and keep the temperature,and the material is melt and plasticizing by extruder,then extruded by die and head and goes into vacuum calibrating device, and cooling and calibrating, then draw-off by haul-off machine, then printing word by ink jet printer, then put into automatic cuter to finish the automatic cut according to pre-establishing length and stacking into the shelf. And the eligible product is packed and put into storeroom, and inferior product is crushed and recycled.
This pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine, cutting machine(or winder) and overturning bracket. 
Extruder: PPR pipe extrusion line adopts high speed and efficiency of single screw extruder. The screw has barrier unit, special material mixing components and new style of barrel grooves. The extruder is equipped with low noise fan, ceramic heating ring, high speed hard gear reducer, full-automatic vacuum loader. This configuration assures good plasticization and mixing effect. It also assures high speed, stable production and great output.  
Pipe marking line: It is extruded by single screw extruder SJ30/25 through the composited extrusion die.
Die head: The material of the die head is high quality 40Cr. It is the most advanced spiral or lattice die head in the world, which assures stable extrusion in the production process. In order to fit the performance of PPR material and assure the stability of pipe diameter and roundness when producing thick-wall pipe with high speed, we adopt water film lubricating and water (or oil) circulation cooling.
Vacuum calibrating water tank: The body is made of high hardness and good quality stainless steel board. It has advanced water circulation and high pressure cooling system, vacuum adjusting equipment and accurate water temperature and water level automatic controlling system. The accurate bronze calibrating sleeve ensures cooling speed and molding pipe. It can be three-dimension adjusted up & down and left & right.  
Water spray cooling tank: The body is made of stainless steel and the shade is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjustable up and down. There is roller in the tank.
Haul-off machine: It adopts frequency conversion. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic and mechanical combination clamping. The bearing has special structure which can effectively reduce the installation error.
Cutting machine: It is automatic dustless cutting machine. Smooth cutting section, simultaneous frequency conversion drive, high accuracy and low noise.
Control system: We can offer SIEMENS PLC control system which is intelligent controlling system. Also we can offer ordinary control system which use SIEMENS electrical parts, Omron temperature controller. Intelligent control makes the operation simple.

Main technical parameter:

Model

Diameter(mm)

Extruder

Speed(m/min)

Max.output

Power(kw)

Dimension

SRQG-63

Ø20-Ø63mm

SJ-65×30

1.5-12

120kg/h

65

易购彩票开户 30 ×2.2 ×2.5m

SRQG-110

Ø20-Ø110mm

SJ-90×30

2-12

220kg/h

110

32 ×2。2 ×2。6m

SRQG-160

Ø63-Ø160mm

易购彩票开户 SJ-90×30

1。3-6

300kg/h

150

32×2.2 ×2.8m

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Prev
Next

SHANDONG HUASU

PLASTIC  TECHNOLOGY CO., LTD

 

ADD: 

No. 8 Haier Road, Jiaozhou Bay industry
Zone,Qingdao Jiaozhou City,P. R. China

 

MOBILE: +8613853290988  

MOBILE: +86-532-87273138/87273138
FAX: +86-532-87273086


E-MAIL: huasu@metatuber.com

SKYPE: qdhuasu
WEB: http://en.metatuber.com

Messages To Us

内蒙古11选5开奖 云南11选5 166彩票投注 山西11选5 平安彩票 山东11选5 内蒙古11选5走势图 内蒙古11选5走势图 炫乐彩票投注 全民彩票